AiBase Gateway

Can I remotely control device or sensor by AiBase Gateway?
Yes, as long as your AiBase gateway is connected to the internet by Wifi or Cellular network
WiFi password was changed, and AiBase Gateway lost connection. What should I do?
Go to “Setting” -> “AiBase”, click on AiBase gateway, and re-configure Wifi
 
AiBase Gateway cannot connect with WIFI .
Check whether the following conditions are met:
  1. Make sure your cell phone is connected to the wireless router,and 2G, 3G, and 4G network are closed.
  2. Make sure you input the correct wireless router password.
  3. Make sure your router supports IEEE802.11b / g / n standard,and authentication mode is WEP, WPA-PSK, or WPA2-PSK.
  4. The devices access to a wireless router has limitations. Please try to turn off some unused wireless devices.
  5. Try to make “AIBase Gateway” with router closely, in order to have provide stronger WIFI signal, or try with a WIFI extender.
How to check the network status of AiBase Gateway?
Push the button twice
Flashing green light: Good network connection
Flashing red light: Poor network connection
 

AiBase APP Setup Instruction Video:

  • 0 Users Found This Useful
Was this answer helpful?